How To Set Up a DMA Card in 2025 – Full Tutorial

Hello guys, this is the owner of SFDMA speaking. First off, thank you for clicking on this video. I really appreciate it. If you find this content helpful, make sure to like the video and subscribe so that the algorithm can help more people who are looking to get started with DMA cheating. This video is part one of a full series on where we will guide you step by step through everything you need to know to set up your DMA hardware and start cheating using DMA cards, uh, DMA cheats, fuser, uh, Macu, etc. In this part, we will walk you through on how to physically install your DMA card, how to configure and uh correctly uh put in the BIOS settings on your main PC and how to flash and test the firmware in your card. At CRFDMA, we are dedicated to deliver top tier firmware, hardware, and cheats, all tailored specifically for serious users. We take pride in offering fair prices without ever efficient corners. Our customer support is fast, friendly, and most importantly, generally helpful. We st stand out because of that. We personally guide every single customer through setting up the DMA hardware. That's why all of our reviews are from Satif users, and we plan to keep it that way. Or our store is fast, reliable, and transparent. You get real-time package checking, tracking, 24/7 support, and same day shipping. Ready to get started? Head over to sfdmma.com and see for yourself. Now, let's get started with this video. For this video, keep in mind that everything done on the right screen is my main PC. Everything done on the left screen is my second PC. So, if you don't know what's going on, just check the background, check on what PC I'm doing it, but I will also notify you when to switch. Then before we start doing anything, make sure your second PC is on Windows 10, version 22 H2. If you don't do this, you can start over again at the end. Uh because most uh uh cheats need Windows 10, at least on the second PC. If you want to be safe, install Windows 10 on both PCs. Then you know for sure that all cheats will work. So let's get started. Step one, entering BIOS. First, we will need to change few set settings in your BIOS. These are critical to make sure make sure your system works properly with the DMA card. To access the BIOS, shut down your PC completely. Then power it back on and repeatedly press the delete key whilst booting up. Please note that the BIOS key might be different depending on your motherboard. It could be F12 or F10 or another key. So, check your manual or look it up if you need it. Step two, changing the BIOS settings. Once you're in the BIOS, either go to advanced or search the settings uh you need to disable. I will put the settings you need to disable in the screen right now. So once you disabled that, after you adjusted all the necessary settings, press F10 to save and exit. Your PC will restart and we are done with step one. Okay, now we're going to install our DMA card. Uh, this is what the package includes. It includes the DMA card, obviously, and a USBC to USB cable. Make sure to use that cable only. So, the DMA card, uh, it goes in like this. It goes into a PCIe slot. It has two ports. Uh, the left port I'm pointing to now is the J-Tech port and the port on the right is the data port. Um the data port is used for uh gaming and uh the J-Tech port is used for flashing only. So go to your PC and plug your DMA card in. Make sure that the uh switch is also on and plug it in. So after plugging in the DMA card in the PCIe slot, it looks like this. So, on the back you have two ports. The left one is the JTAG. The right one is the data port. So, what we're going to do is plug our uh cable we got into the JTAG port. That's the one on the left, the one on the side of the motherboard. All right. So, when you got that in, you plug the other end on the back of your second PC. Make sure you plug it in a USB 3.0. know. So, also make sure like I told earlier that your switch is on on the back of your DMA card. Then start your main PC. The card will flash green and red. That's completely normal. If both lights are red, don't worry. They will turn green when we are flashing. Hey. Hey. Hey, hey, hey. Hey, hey, hey. Hey, hey, hey. So, just like that, flashing is done. Now, go to your PC and switch the DMA cable like shown and turn your PCs back on. Make sure after the flash to turn them both off. Uh wait 20 seconds before turning them back on. Do not restart. Uh cold boot, turn them off and wait for them to restart. After that, go back to your second PC and install the drivers as shown. Hello. Oh my god. Critical girls. Hey Now we need to go to the main PC to install the DMA car drivers. [Music] [Music] Hey, hey, hey.